|
<< Click to Display Table of Contents >> Navigation: User Guide > Data > Input data > Input CAPI mode |
This mode is used for entering data and can be used by the respondent or an interviewer. See Input data introduction for other modes.
CAPI stands for Computer Assisted Personal Interview.
Use the * (multiply) key to leave the question unanswered (blank). This is only allowed if Blank Allowed is set for the question.
The Return or Enter key will take you to the next question.
The display during data entry varies depending on the type of question:
You can use the mouse to select a response.
The quickest way to enter data is to type the response key (usually 1-4 digits) alongside the correct response.
You can use the mouse. to select or deselect responses.
The quickest way to enter data is to type the response keys (usually 1-4 digits) alongside the correct response.
If there is only one answer you only need to enter the response key as for a single-coded question.
If there is more than one answer you will need to use the "/" (divide or forward slash) key before and after you type all the response keys in full. You can use the Enter key instead of the "/" at the end.
For a previously answered question you can precede a response key with + (plus) or - (minus) to add or remove a selected response.
You need to type the answer in the box.
Use the check box to set or leave blank a date or time.
You need to type the answer text in the box.
These questions do not have any answers.
If there is a picture attached to this entry this will be shown before the next question.